Injection polyurethane wheels, polyamide 6 centre, fixed bracket type NL


Injection polyurethane wheels, polyamide 6 centre, fixed bracket type NL
Wheel description
Injection polyurethane tread; hardness 60 Shore D. Polyammide 6 centre.
Plain bearing bore or roller bearing bore
The plain bearing bore results from a hole in the material forming the centre of the wheel and contains the axle.
In the roller bearing bore, the bearing housing is obtained by moulding and contains cylindrical roller bearings with polyamide 6 cage.
Axle
Axle composed of ground steel bush with bolt according to UNI EN 24017 and nut according to UNI EN 24032.
Fixed bracket type NL
Fixed bracket type NL. The fork is made of pressed steel zinc plated.

 Wheel diametre Wheel width Overall height Top-plate outer dimensions Hole spacing Hole width Load capacity daN Hub with plain bearing Hub with roller bearing    
.
Order OnLine8030107100x8580x609120605701
Order OnLine10030128100x8580x609170605702
Order OnLine12535156100x8580x609220605703
Order OnLine15035182100x8580x609220605704
Order OnLine15045194140x110105x8011300605711
Order OnLine20050240140x110105x8011300605706
.

 Wheel diametre Wheel width Overall height Top-plate outer dimensions Hole spacing Hole width Load capacity daN Hub with plain bearing Hub with roller bearing    
.
Order OnLine8030107100x8580x609120605901
Order OnLine10030128100x8580x609170605902
Order OnLine12535156100x8580x609220605903
Order OnLine15035182100x8580x609220605904
Order OnLine15045194140x110105x8011300605911
Order OnLine20050240140x110105x8011500605906
.