Thermoplastic rubber wheels, polypropylene centre, swivel bracket with bolt hole type NL

Wheel description Grey non-marking thermoplastic rubber wheels, hardness 80 +/-4 Shore A; polypropylene centre Plain bearing bore or roller bearing bore The plain bearing bore results from a hole in the material forming the centre of the wheel and contains the axle. In the roller bearing bore, the bearing housing is obtained by moulding and contains cylindrical roller bearings with polyamide 6 cage. Axle Axle composed of ground steel bush with bolt according to UNI EN 24017 and nut according to UNI EN 24032. Swivel bracket with bolt hole type NL Swivel bracket with bolt hole type NL. The plate and fork are of pressed steel zinc plated finish; swivel actions: double ball greased race. The king pin is integral with top plate and duly rivetted.

.
	80	30	107	39	73	12	70	717401
	100	30	128	35	73	12	100	717402
	125	35	156	37	73	12	120	717403
	150	35	182	37	73	12	140	717404
	150	45	188	56	102	20	180	717411
	200	50	236	56	102	20	225	717406
.

.
	80	30	107	39	73	12	70		717801
	100	30	128	35	73	12	100		717802
	125	35	156	37	73	12	120		717803
	150	35	182	37	73	12	140		717804
	150	45	188	56	102	20	180		717811
	200	50	236	56	102	20	225		717806
.