Standard rubber wheels, polypropylene centre, swivel bracket type NL with bolt hole and front lock

Wheel description Standard rubber tread; hardness 85 +/-3 Shore A. Polypropylene centre. Plain bearing bore or roller bearing bore The plain bearing bore results from a hole in the material forming the centre of the wheel and contains the axle. In the roller bearing bore, the bearing housing is obtained by moulding and contains cylindrical roller bearings with polyamide 6 cage. Axle Axle composed of ground steel bush with bolt according to UNI EN 24017 and nut according to UNI EN 24032. Swivel bracket with bolt hole NL with front lock Swivel bracket with bolt hole type NL. The plate and fork are of pressed steel zinc plated finish; swivel actions: double ball greased race. The king pin is integral with top plate and duly rivetted. The front brake is necessary to lock wheel and top plate rotation.

.
	80	25	107	39	120	80	12	65	525601
	100	30	128	35	120	80	12	80	525602
	125	37,5	156	37	120	80	12	110	525603
	140	37,5	176	37	120	80	12	120	525604
	150	40	182	37	120	80	12	130	525611
	160	40	193	56	156	102	20	150	525610
	180	45	214	56	156	102	20	180	525605
	200	50	236	56	156	102	20	225	525606
.

.
	80	25	107	39	120	80	12	65		525621
	100	30	128	35	120	80	12	80		525622
	125	37,5	156	37	120	80	12	110		525623
	140	37,5	176	37	120	80	12	120		525624
	150	40	182	37	120	80	12	130		525631
	160	40	193	56	156	102	20	150		525630
	180	45	214	56	156	102	20	180		525625
	200	50	236	56	156	102	20	225		525626
.