Non-marking rubber wheels, polypropylene centre, swivel bracket with bolt hole type NL with front lock

Wheel description Standard non-marking rubber tread; hardness 80 Shore A. Polypropylene centre. Plain bearing bore or roller bearing bore The plain bearing bore results from a hole in the material forming the centre of the wheel and contains the axle. In the roller bearing bore, the bearing housing is obtained by moulding and contains cylindrical roller bearings with polyamide 6 cage. Axle Axle composed of ground steel bush with bolt according to UNI EN 24017 and nut according to UNI EN 24032. Swivel bracket with bolt hole NL with front lock Swivel bracket with bolt hole type NL. The plate and fork are of pressed steel zinc plated finish; swivel actions: double ball greased race. The king pin is integral with top plate and duly rivetted. The front brake is necessary to lock wheel and top plate rotation.

.
	80	25	107	39	120	73	12		65	225601
	100	30	128	35	120	73	12		80	225602
	125	37,5	156	37	120	73	12		110	225603
	140	37,5	176	37	120	73	12		120	225604
	150	40	182	37	120	73	12		130	225611
	160	40	193	56	156	102	20		150	225610
	180	45	214	56	156	102	20		180	225605
	200	50	236	56	156	102	20		225	225606
.

.
	80	25	107	39	120	73	12		65		225621
	100	30	128	35	120	73	12		80		225622
	125	37,5	156	37	120	73	12		110		225623
	140	37,5	176	37	120	73	12		120		225624
	150	40	182	37	120	73	12		130		225631
	160	40	193	56	156	102	20		150		225630
	200	50	236	56	156	102	20		225		225626
.