› Product card

Injection polyurethane wheels, polyamide 6 centre, fixed bracket type P


Injection polyurethane wheels, polyamide 6 centre, fixed bracket type P
Wheel description
Injection polyurethane tread; hardness 60 Shore D. Polyammide 6 centre.
Plain bearing bore or roller bearing bore
The plain bearing bore results from a hole in the material forming the centre of the wheel and contains the axle.
In the roller bearing bore, the bearing housing is obtained by moulding and contains cylindrical roller bearings with polyamide 6 cage.
Axle
Axle composed of ground steel bush with bolt according to UNI EN 24017 and nut according to UNI EN 24032.
Fixed bracket type P
Fixed bracket type P. The fork is made of pressed steel zinc plated.

 Wheel diametre Wheel width Overall height Top-plate outer dimensions Hole spacing Hole width Load capacity daN Hub with plain bearing Hub with roller bearing    
.
Order OnLine10030138100x8580x609170608102
Order OnLine12535161100x8580x609230608103
Order OnLine15045200140x110105x8011350608604
Order OnLine20050250140x110105x8011450608606
.

 Wheel diametre Wheel width Overall height Top-plate outer dimensions Hole spacing Hole width Load capacity daN Hub with plain bearing Hub with roller bearing    
.
Order OnLine10030138100x8580x609170608302
Order OnLine12535161100x8580x609230608303
Order OnLine15045200140x110105x8011350608504
Order OnLine20050250140x110105x8011450608506
.