Non-marking rubber wheels, polypropylene centre, swivel top plate bracket type NL

Wheel description Standard non-marking rubber tread; hardness 80 Shore A. Polypropylene centre. Plain bearing bore or roller bearing bore The plain bearing bore results from a hole in the material forming the centre of the wheel and contains the axle. In the roller bearing bore, the bearing housing is obtained by moulding and contains cylindrical roller bearings with polyamide 6 cage. Axle Axle composed of ground steel bush with bolt according to UNI EN 24017 and nut according to UNI EN 24032. Swivel top plate bracket type NL Swivel top plate bracket type NL. The plate, the ball race ring and the fork are made of pressed steel zinc plated finish; swivel actions: double ball greased race with dust protection seal made of polyethilene. The king pin is integral with top plate and duly rivetted.

.
	80	25	107	100x85	80x60	9	39		65	224401
	100	30	128	100x85	80x60	9	35		80	224402
	125	37,5	156	100x85	80x60	9	37		110	224403
	140	37,5	176	100x85	80x60	9	37		120	224404
	150	40	182	100x85	80x60	9	37		130	224411
	160	40	199	140x110	105x80	11	56		150	224410
	180	45	219	140x110	105x80	11	56		180	224405
	200	50	240	140x110	105x80	11	56		225	224406
.

.
	80	25	107	100x85	80x60	9	39		65		224601
	100	30	128	100x85	80x60	9	35		80		224602
	125	37,5	156	100x85	80x60	9	37		110		224603
	140	37,5	176	100x85	80x60	9	37		120		224604
	150	40	182	100x85	80x60	9	37		130		224611
	160	40	199	140x110	105x80	11	56		150		224610
	200	50	240	140x110	105x80	11	56		225		224606
.