Injection polyurethane wheels, polyamide 6 centre, swivel top plate bracket type NL with front lock

Wheel description Injection polyurethane tread; hardness 80 Shore A. Thermoplastic centre. Plain bearing bore or roller bearing bore The plain bearing bore results from a hole in the material forming the centre of the wheel and contains the axle. In the roller bearing bore, the bearing housing is obtained by moulding and contains cylindrical roller bearings with polyamide 6 cage. Axle Axle composed of ground steel bush with bolt according to UNI EN 24017 and nut according to UNI EN 24032. Swivel top plate bracket type NL with front lock Swivel top plate bracket type NL. The plate, the ball rice ring and the fork are of pressed steel zinc plated finish; swivel actions: double ball greased race with dust protection seal made of polyethilene. The king pin is integral with top plate and duly rivetted. The front brake is necessary to lock wheel and top plate rotation.

.
	80	30	107	100x85	80x60	9	39	120	75	616601
	100	30	128	100x85	80x60	9	35	120	120	616602
	125	35	156	100x85	80x60	9	37	120	180	616603
	150	35	182	100x85	80x60	9	37	120	220	616604
	150	45	194	140x110	105x80	11	56	156	250	616611
	200	50	240	140x110	105x80	11	56	156	300	616606
.

.
	80	30	107	100x85	80x60	9	39	120	75		616621
	100	30	128	100x85	80x60	9	35	120	120		616622
	125	35	156	100x85	80x60	9	37	120	180		616623
	150	35	182	100x85	80x60	9	37	120	220		616624
	150	45	194	140x110	105x80	11	56	156	250		616631
	200	50	240	140x110	105x80	11	56	156	300		616626
.