Injection polyurethane wheels, polyamide 6 centre, swivel bracket with bolt hole type NLX with front lock

Wheel description Injection polyurethane tread; hardness 60 Shore D. Polyammide 6 centre. Plain bearing bore or stainless steel roller bearing bore The plain bearing bore results from a hole in the material forming the centre of the wheel and contains the axle. In the roller bearing bore, the bearing housing is obtained by moulding and contains stainless steel cylindrical roller bearings with polyam Stainless steel axle Axle composed of ground AISI 304 stainless steel bush, with stainless steel bolt according to UNI EN 24017 and stainless steel nut according to UNI EN 24032. Swivel bracket with bolt hole NLX with front lock Swivel bracket type NLX. The plate and fork are made of AISI 304 stainless steel; swivel actions: double ball greased race of AISI 304 stainless steel. The king pin is integral with top plate and duly rivetted. The front brake is necessary to lock wheel and top plate rotation.

.
	80	30	107	39	120	73	12	120	608801
	100	30	128	35	120	73	12	170	608802
	125	35	156	37	120	73	12	220	608803
	150	35	182	37	120	73	12	220	608804
	150	45	188	56	156	102	20	300	608811
	200	50	236	56	156	102	20	300	608806
.

.
	80	30	107	39	120	73	12	120		608821
	100	30	128	35	120	73	12	170		608822
	125	35	156	37	120	73	12	220		608823
	150	35	182	37	120	73	12	220		608824
	150	45	188	56	156	102	20	300		608831
	200	50	236	56	156	102	20	300		608826
.