Non-marking rubber wheels, polypropylene centre, swivel bracket with bolt hole type NL

Wheel description Standard non-marking rubber tread; hardness 80 Shore A. Polypropylene centre. Plain bearing bore or roller bearing bore The plain bearing bore results from a hole in the material forming the centre of the wheel and contains the axle. In the roller bearing bore, the bearing housing is obtained by moulding and contains cylindrical roller bearings with polyamide 6 cage. Axle Axle composed of ground steel bush with bolt according to UNI EN 24017 and nut according to UNI EN 24032. Swivel bracket with bolt hole type NL Swivel bracket with bolt hole type NL. The plate and fork are of pressed steel zinc plated finish; swivel actions: double ball greased race. The king pin is integral with top plate and duly rivetted.

.
	80	25	107	39	80	12		65	227701
	100	30	128	35	80	12		80	227702
	125	37,5	156	37	80	12		110	227703
	140	37,5	176	37	80	12		120	227704
	150	40	182	37	80	12		130	227711
	160	40	193	56	102	20		150	227710
	180	45	214	56	102	20		180	227705
	200	50	236	56	102	20		225	227706
.

.
	80	25	107	39	80	12		65		227901
	100	30	128	35	80	12		80		227902
	125	37,5	156	37	80	12		110		227903
	140	37,5	176	37	80	12		120		227904
	150	40	182	37	80	12		130		227911
	160	40	193	56	102	20		150		227910
	200	50	236	56	102	20		225		227906
.