› Product card

"TR" polyurethane wheels, polyamide centre, fixed bracket type P



Wheel description
TR polyurethane tread; hardness 95+/-3 Shore A. Polyamide 6 centre.
Plain bearing bore or stainless steel roller bearing bore
The plain bearing bore results from a hole in the material forming the centre of the wheel and contains the axle.
In the roller bearing bore, the bearing housing is obtained by moulding and contains stainless steel cylindrical roller bearings with polyam
Axle
Axle composed of ground steel bush with bolt according to UNI EN 24017 and nut according to UNI EN 24032.
Fixed bracket type P
Fixed bracket type P. The fork is made of pressed steel zinc plated.

 Wheel diametre Wheel width Overall height Top-plate outer dimensions Hole spacing Hole width Load capacity daN Hub with plain bearing Hub with roller bearing    
.
Order OnLine10030138100x8580x609200668102
Order OnLine12530161100x8580x609250668103
Order OnLine15040200140x110105x8011400668604
Order OnLine17540225140x110105x8011470668605
Order OnLine20050250140x110105x8011600668606
.

 Wheel diametre Wheel width Overall height Top-plate outer dimensions Hole spacing Hole width Load capacity daN Hub with plain bearing Hub with roller bearing    
.
Order OnLine10030138100x8580x609200668302
Order OnLine12530161100x8580x609250668303
Order OnLine15040200140x110105x8011400668504
Order OnLine17540225140x110105x8011470668505
Order OnLine20050250140x110105x8011600668506
.