Thermoplastic rubber wheels, polypropylene centre, swivel top plate bracket type NL

Wheel description Grey non-marking thermoplastic rubber wheels, hardness 80 +/-4 Shore A; polypropylene centre Plain bearing bore or roller bearing bore The plain bearing bore results from a hole in the material forming the centre of the wheel and contains the axle. In the roller bearing bore, the bearing housing is obtained by moulding and contains cylindrical roller bearings with polyamide 6 cage. Axle Axle composed of ground steel bush with bolt according to UNI EN 24017 and nut according to UNI EN 24032. Swivel top plate bracket type NL Swivel top plate bracket type NL. The plate, the ball race ring and the fork are made of pressed steel zinc plated finish; swivel actions: double ball greased race with dust protection seal made of polyethilene. The king pin is integral with top plate and duly rivetted.

.
	80	30	107	100x85	80x60	9	39	70	0,60	714201
	100	30	128	100x85	80x60	9	35	100	0,70	714202
	125	35	156	100x85	80x60	9	37	120	0,86	714203
	150	35	182	100x85	80x60	9	37	140	0,96	714204
	150	45	194	140x110	105x80	11	56	180	1,72	714211
	200	50	240	140x110	105x80	11	56	225	2,07	714206
.

.
	80	30	107	100x85	80x60	9	39	70	0,61		714501
	100	30	128	100x85	80x60	9	35	100	0,71		714502
	125	35	156	100x85	80x60	9	37	120	0,87		714503
	150	35	182	100x85	80x60	9	37	140	1,11		714504
	150	45	194	140x110	105x80	11	56	180	1,87		714511
	200	50	240	140x110	105x80	11	56	225	2,10		714506
.