"TR" polyurethane wheels, polyamide centre, swivel top plate bracket type P with front lock



Wheel description
TR polyurethane tread; hardness 95+/-3 Shore A. Polyamide 6 centre.
Plain bearing bore or roller bearing bore
The plain bearing bore results from a hole in the material forming the centre of the wheel and contains the axle.
In the roller bearing bore, the bearing housing is obtained by moulding and contains cylindrical roller bearings with polyamide 6 cage.
Axle
Axle composed of ground steel bush with bolt according to UNI EN 24017 and nut according to UNI EN 24032.
Swivel top plate bracket P with adjustable brake
Swivel top plate bracket type P. The plate, the ball rice ring and the fork are made of pressed steel zinc plated finish; swivel actions: double ball greased race with dust protection seal made of nylon. The king pin is made of steel bolt 8.8 and nut series. The adjustable brake locks wheel and top plate rotation.

 Wheel diametre Wheel width Overall height Top-plate outer dimensions Hole spacing Hole width Offset Brake swept radius Load capacity daN Hub with plain bearing Hub with roller bearing    
.
Order OnLine10030138100x8580x60946123200669002
Order OnLine12530161100x8580x60948123250669003
.

 Wheel diametre Wheel width Overall height Top-plate outer dimensions Hole spacing Hole width Offset Brake swept radius Load capacity daN Hub with plain bearing Hub with roller bearing    
.
Order OnLine10030138100x8580x60946123200669102
Order OnLine12530161100x8580x60948123250669103
.