Injection polyurethane wheels,polyamide 6 centre, swivel bracket with bolt hole type NL

Wheel description Injection polyurethane tread; hardness 80 Shore A. Thermoplastic centre. Plain bearing bore or roller bearing bore The plain bearing bore results from a hole in the material forming the centre of the wheel and contains the axle. In the roller bearing bore, the bearing housing is obtained by moulding and contains cylindrical roller bearings with polyamide 6 cage. Axle Axle composed of ground steel bush with bolt according to UNI EN 24017 and nut according to UNI EN 24032. Swivel bracket with bolt hole type NL Swivel bracket with bolt hole type NL. The plate and fork are of pressed steel zinc plated finish; swivel actions: double ball greased race. The king pin is integral with top plate and duly rivetted.

.
	80	30	107	39	73	12	75	617701
	100	30	128	35	73	12	120	617702
	125	35	156	37	73	12	180	617703
	150	35	182	37	73	12	220	617704
	150	45	188	56	102	20	250	617711
	200	50	236	56	102	20	300	617706
.

.
	80	30	107	39	73	12	75		617801
	100	30	128	35	73	12	120		617802
	125	35	156	37	73	12	180		617803
	150	35	182	37	73	12	220		617804
	150	45	188	56	102	20	250		617811
	200	50	236	56	102	20	300		617806
.