Standard rubber wheels, polypropylene centre, swivel bracket type NL with bolt hole

Wheel description Standard rubber tread; hardness 85 +/-3 Shore A. Polypropylene centre. Plain bearing bore or roller bearing bore The plain bearing bore results from a hole in the material forming the centre of the wheel and contains the axle. In the roller bearing bore, the bearing housing is obtained by moulding and contains cylindrical roller bearings with polyamide 6 cage. Axle Axle composed of ground steel bush with bolt according to UNI EN 24017 and nut according to UNI EN 24032. Swivel bracket with bolt hole type NL Swivel bracket with bolt hole type NL. The plate and fork are of pressed steel zinc plated finish; swivel actions: double ball greased race. The king pin is integral with top plate and duly rivetted.

.
	80	25	107	39	80	12	65	527701
	100	30	128	35	80	12	80	527702
	125	37,5	156	37	80	12	110	527703
	140	37,5	176	37	80	12	120	527704
	150	40	182	37	80	12	130	527711
	160	40	193	56	102	20	150	527710
	180	45	214	56	102	20	180	527705
	200	50	236	56	102	20	225	527706
.

.
	80	25	107	39	80	12	65		527901
	100	30	128	35	80	12	80		527902
	125	37,5	156	37	80	12	110		527903
	140	37,5	176	37	80	12	120		527904
	150	40	182	37	80	12	130		527911
	160	40	193	56	102	20	150		527910
	180	45	214	56	102	20	180		527905
	200	50	236	56	102	20	225		527906
.