Thermoplastic rubber wheels, polypropylene centre, swivel top plate bracket type NL with front lock

Wheel description Grey non-marking thermoplastic rubber wheels, hardness 80 +/-4 Shore A; polypropylene centre Plain bearing bore or roller bearing bore The plain bearing bore results from a hole in the material forming the centre of the wheel and contains the axle. In the roller bearing bore, the bearing housing is obtained by moulding and contains cylindrical roller bearings with polyamide 6 cage. Axle Axle composed of ground steel bush with bolt according to UNI EN 24017 and nut according to UNI EN 24032. Swivel top plate bracket type NL with front lock Swivel top plate bracket type NL. The plate, the ball rice ring and the fork are of pressed steel zinc plated finish; swivel actions: double ball greased race with dust protection seal made of polyethilene. The king pin is integral with top plate and duly rivetted. The front brake is necessary to lock wheel and top plate rotation.

.
	80	30	107	100x85	80x60	9	39	120	70	0,79	716601
	100	30	128	100x85	80x60	9	35	120	100	0,85	716602
	125	35	156	100x85	80x60	9	37	120	120	1,00	716603
	150	35	182	100x85	80x60	9	37	120	140	1,14	716604
	150	45	194	140x110	105x80	11	56	156	180	2,00	716611
	200	50	240	140x110	105x80	11	56	156	225	2,35	716606
.

.
	80	30	107	100x85	80x60	9	39	120	70	0,82		716621
	100	30	128	100x85	80x60	9	35	120	100	0,86		716622
	125	35	156	100x85	80x60	9	37	120	120	1,03		716623
	150	35	182	100X85	80x60	9	37	120	140	1,16		716624
	150	45	194	140X110	105x80	11	56	156	180	2,05		716631
	200	50	240	140x110	105x80	11	56	156	225	2,34		716626
.