Thermoplastic rubber wheels, polypropylene centre, swivel bracket with bolt hole type NL with front lock

Wheel description Grey non-marking thermoplastic rubber wheels, hardness 80 +/-4 Shore A; polypropylene centre Plain bearing bore or roller bearing bore The plain bearing bore results from a hole in the material forming the centre of the wheel and contains the axle. In the roller bearing bore, the bearing housing is obtained by moulding and contains cylindrical roller bearings with polyamide 6 cage. Axle Axle composed of ground steel bush with bolt according to UNI EN 24017 and nut according to UNI EN 24032. Swivel bracket with bolt hole NL with front lock Swivel bracket with bolt hole type NL. The plate and fork are of pressed steel zinc plated finish; swivel actions: double ball greased race. The king pin is integral with top plate and duly rivetted. The front brake is necessary to lock wheel and top plate rotation.

.
	80	30	107	39	120	73	12	70	716501
	100	30	128	35	120	73	12	100	716502
	125		35	37	120	73	12	120	716503
	150	35	182	37	120	73	12	140	716504
	150	45	188	56	156	102	20	180	716511
	200	50	236	56	156	102	20	225	716506
.

.
	80	30	107	39	120	73	12	70		716521
	100	30	128	35	120	73	12	100		716522
	125	35	156	37	120	73	12	120		716523
	150	35	182	37	120	73	12	140		716524
	150	45	188	56	156	102	20	180		716531
	200	50	236	56	156	102	20	225		716526
.