Injection polyurethane wheels, polyamide 6 centre, swivel top plate bracket type NL

Wheel description Injection polyurethane tread; hardness 80 Shore A. Thermoplastic centre. Plain bearing bore or roller bearing bore The plain bearing bore results from a hole in the material forming the centre of the wheel and contains the axle. In the roller bearing bore, the bearing housing is obtained by moulding and contains cylindrical roller bearings with polyamide 6 cage. Axle Axle composed of ground steel bush with bolt according to UNI EN 24017 and nut according to UNI EN 24032. Swivel top plate bracket type NL Swivel top plate bracket type NL. The plate, the ball race ring and the fork are made of pressed steel zinc plated finish; swivel actions: double ball greased race with dust protection seal made of polyethilene. The king pin is integral with top plate and duly rivetted.

.
	80	30	107	100x85	80x60	9	39	75	614201
	100	30	128	100x85	80x60	9	35	120	614202
	125	35	156	100x85	80x60	9	37	180	614203
	150	35	182	100x85	80x60	9	37	220	614204
	150	45	194	140x110	105x80	11	56	250	614211
	200	50	240	140x110	105x80	11	56	300	614206
.

.
	80	30	107	100x85	80x60	9	39	75		614501
	100	30	128	100x85	80x60	9	35	120		614502
	125	35	156	100x85	80x60	9	37	180		614503
	150	35	182	100x85	80x60	9	37	220		614504
	150	45	194	140x110	105x80	11	56	250		614511
	200	50	240	140x110	105x80	11	56	300		614506
.