Injection polyurethane wheels, polyamide 6 centre, swivel bracket with bolt hole type NL with front lock

Wheel description Injection polyurethane tread; hardness 60 Shore D. Polyammide 6 centre. Plain bearing bore or roller bearing bore The plain bearing bore results from a hole in the material forming the centre of the wheel and contains the axle. In the roller bearing bore, the bearing housing is obtained by moulding and contains cylindrical roller bearings with polyamide 6 cage. Axle Axle composed of ground steel bush with bolt according to UNI EN 24017 and nut according to UNI EN 24032. Swivel bracket with bolt hole NL with front lock Swivel bracket with bolt hole type NL. The plate and fork are of pressed steel zinc plated finish; swivel actions: double ball greased race. The king pin is integral with top plate and duly rivetted. The front brake is necessary to lock wheel and top plate rotation.

.
	80	30	107	39	120	73	12	120	606401
	100	30	128	35	120	73	12	170	606402
	125	35	156	37	120	73	12	220	606403
	150	35	182	37	120	73	12	220	606404
	150	45	188	56	156	102	20	300	606411
	200	50	236	56	156	102	20	300	606406
.

.
	80	30	107	39	120	73	12	120		606421
	100	30	128	35	120	73	12	170		606422
	125	35	156	37	120	73	12	220		606423
	150	35	182	37	120	73	12	250		606424
	150	45	188	56	156	102	20	300		606431
	200	50	236	56	156	102	20	300		606426
.