Standard rubber wheels, polypropylene centre, swivel top plate bracket type NL

Wheel description Standard rubber tread; hardness 85 +/-3 Shore A. Polypropylene centre. Plain bearing bore or roller bearing bore The plain bearing bore results from a hole in the material forming the centre of the wheel and contains the axle. In the roller bearing bore, the bearing housing is obtained by moulding and contains cylindrical roller bearings with polyamide 6 cage. Axle Axle composed of ground steel bush with bolt according to UNI EN 24017 and nut according to UNI EN 24032. Swivel top plate bracket type NL Swivel top plate bracket type NL. The plate, the ball race ring and the fork are made of pressed steel zinc plated finish; swivel actions: double ball greased race with dust protection seal made of polyethilene. The king pin is integral with top plate and duly rivetted.

.
	80	25	107	100x85	80x60	9	39	65	524401
	100	30	128	100x85	80x60	9	35	80	524402
	125	37,5	156	100x85	80x60	9	37	110	524403
	140	37,5	176	100x85	80x60	9	37	120	524404
	150	40	182	100x85	80x60	9	37	130	524411
	160	40	187	100x85	80x60	9	50	150	524412
	160	40	199	140x110	105x80	11	56	150	524410
	180	45	219	140x110	105x80	11	56	180	524405
	200	50	240	140x110	105x80	11	56	225	524406
	250	60	296	200x160	160x120	14	87	300	524708
.

.
	80	25	107	100x85	80x60	9	39	65		524601
	100	30	128	100x85	80x60	9	35	80		524602
	125	37,5	156	100x85	80x60	9	37	110		524603
	140	37,5	176	100x85	80x60	9	37	120		524604
	150	40	182	100x85	80x60	9	37	130		524611
	160	40	187	100x85	80x60	9	50	150		524612
	160	40	199	140x110	105x80	11	56	150		524610
	180	45	219	140x110	105x80	11	56	180		524605
	200	50	240	140x110	105x80	11	56	225		524606
	250	60	296	200x160	160x120	14	87	300		524908
.