SERIES 65ESD: ESD "TR" polyurethane wheels, electrical resistance <10^9 Ohm, aluminium centre
SERIES 65 ESD ESD "TR" POLYURETHANE WHEELS, ELECTRICAL RESISTANCE <10^9 OHM, ALUMINIUM CENTRE


80-200
mm
Hardness
90 SHORE A
Load capacity at 4 km/h
170-680
daN
Load capacity at 6 km/h daN
130-540
daN
Static load
0
daN
Rolling resistance
150-360
daN
Temperature °C
-20 ° / +80
°C
Suitable for medium-heavy duty application, in those environments where, for safety reasons or for the correct functioning of the equipment, an electro static discharge is required, also with mechanical handling, with speed up to 6 km/h. .
The excellent rolling resistance allows an easy handling of heavy loads even with wheels of small diameter.
ESD "TR" polyurethane wheels, electrical resistance <10^9 Ohm, swivel top plate bracket NL

bracket
NL

ESD "TR" polyurethane wheels, electrical resistance <10^9 Ohm, fixed bracket NL

bracket
NL

ESD "TR" polyurethane wheels, electrical resistance <10^9 Ohm, swivel top plate bracket NL with brake

bracket
NL

ESD "TR" polyurethane wheels, electrical resistance <10^9 Ohm, swivel top plate bracket M

bracket
M

ESD "TR" polyurethane wheels, electrical resistance <10^9 Ohm, swivel top plate bracket M with brake

bracket
M

ESD "TR" polyurethane wheels, electrical resistance <10^9 Ohm, swivel top plate bracket P

bracket
P

$bloccosupporto
ESD "TR" polyurethane wheels, electrical resistance <10^9 Ohm, swivel top plate bracket P with front brake

bracket
P

ESD "TR" polyurethane wheels, electrical resistance <10^9 Ohm, swivel top plate bracket P with rear brake

bracket
P

ESD "TR" polyurethane wheels, electrical resistance <10^9 Ohm, swivel top plate bracket PT

bracket
PT

ESD "TR" polyurethane wheels, electrical resistance <10^9 Ohm, swivel top plate bracket PT with rear brake

bracket
PT

TECHNICAL FEATURES

LOAD CAPACITY: 170-680 daN
WHEEL TREAD: ESD TR polyurethane, dark-grey non-marking colour, with electrical resistance values <10^9 Ω (=<1GOhm), hardness 90 Shore A, with excellent rolling resistance and elasticity and good resistance to wear and tear
CENTRE: made of cast aluminium
BRACKETS: 

USAGE CONDITIONS

Suitable for environment with atmospheric agents, alcohol and glycol; not suitable for applications where mineral and organic acids, base solutions and saturated vapour are present.

WEAK ACIDSWEAK BASES
STRONG ACIDSSTRONG BASES
WATERHYDROCARBONS
ALCOHOLSOLVENTS

FLOORS

Suitable for tiles and cement-resin.
Not recommended unpaved floors or in the presence of processing residues.
Not suitable in the presence of obstacles, even if small.
They do not mark or damage fragile floors.

Tile floor
Tile floor
Asphalt floor
Asphalt floor
Resin cement floor
Resin cement floor
Not paved floor
Not paved floor
Expanded metal floor
Expanded metal floor
Floor with chips
Floor with chips
Floor with obstacles
Floor with obstacles

Force required to push or tow a wheel

For each load and diameter, the table indicates the force (in daN) needed to push or tow a single wheel at the constant speed of 4 km/h on smooth flooring. For manual handling of a 4-wheeled trolley we recommend diameters that have values < 5 daN, for frequent handling we recommend diameters with values < 3 daN.

150 KG 250 KG 350 KG 450 KG 550 KG 650 KG
80 mm 3,2----------
100 mm 2,35,2--------
125 mm 1,74,56,5------
150 mm 1,23,8678----
160 mm <13,356,58----
200 mm <134,967,89