INDUSTRIAL - MEDIUM DUTY


SERIES 73AE: Elastic rubber wheels, polyamide 6 centre
SERIES 73 AE ELASTIC RUBBER WHEELS, POLYAMIDE 6 CENTRE

100-200
mm
Hardness
70 SHORE A
Load capacity at 4 km/h
150-350
daN
Rolling resistance
100-235
daN
Temperature °C
-20 ° / +70
°C
Wheels with excellent elasticity features, they are particularly suitable for use on uneven surfaces, in presence of obstacles or for mixed indoor/outdoor uses with medium duty loads.
The good elasticity and rolling resistance guarantee minimum effort, particularly on
uneven surfaces.
Non-marking blu elastic rubber wheels, polyamide 6 centre
Non-marking blu elastic rubber wheels, polyamide 6 centre
Non-marking blu elastic rubber wheels, polyamide 6 centre, swivel top plate bracket type NL

bracket
NL

Non-marking blu elastic rubber wheels, polyamide 6 centre, fixed bracket type NL

bracket
NL

Non-marking blu elastic rubber wheels, polyamide 6 centre, swivel top plate bracket type NL with front lock

bracket
NL

Non-marking blu elastic rubber wheels, polyamide 6 centre, swivel top plate bracket type P

bracket
P

Non-marking blu elastic rubber wheels, polyamide 6 centre, fixed bracket type P

bracket
P

Non-marking blu elastic rubber wheels, polyamide 6 centre, swivel top plate bracket type P with front lock

bracket
P

Non-marking blu elastic rubber wheels, polyamide 6 centre, swivel top plate bracket type P with rear lock

bracket
P

TECHNICAL FEATURES

LOAD CAPACITY: 150-350 daN
WHEEL TREAD: Non-marking blu elastic rubber, hardness 70 Shore A
CENTRE: polyamide 6
BRACKETS:  NL, P, 

ENVIRONMENTS OF USE

Designed for industrial environments, even in presence of medium-harsh chemical agents. Not suitable in presence of organic, aromatic solvents, chlorinated substances and hydrocarbons.

WEAK ACIDSWEAK BASES
STRONG ACIDSSTRONG BASES
WATERHYDROCARBONS
ALCOHOLSOLVENTS

FLOORS

Suitable for all types of floors, even outdoors. They facilitate the overcoming of obstacles.
They do not damage or mark floors.

Tile floor
Tile floor		Asphalt floor
Asphalt floor		Resin cement floor
Resin cement floor		Not paved floor
Not paved floor		Expanded metal floor
Expanded metal floor		Floor with chips
Floor with chips		Floor with obstacles
Floor with obstacles

Force required to push or tow a wheel

For each load and diameter, the table indicates the force (in daN) needed to push or tow a single wheel at the constant speed of 4 km/h on smooth flooring. For manual handling of a 4-wheeled trolley we recommend diameters that have values < 5 daN, for frequent handling we recommend diameters with values < 3 daN.

50 KG 100 KG 150 KG 200 KG 300 KG
100 mm 258----
125 mm 1,8357--
160 mm 12368,5
200 mm <11,72,53,86,5