SERIES 61CC: Thermoplastic polyurethane wheels, polyamide 6 centre, hub with single ball bearing
SERIES 61 CC THERMOPLASTIC POLYURETHANE WHEELS, POLYAMIDE 6 CENTRE, HUB WITH BALL BEARINGS


80-200
mm
Hardness
85 SHORE A
Load capacity at 4 km/h
85-300
daN
Rolling resistance
85-300
daN
Temperature °C
-15 ° / +80
°C
Available with stainless steel brackets
Suitable for trolleys and machinery with medium-duty loads, also in case of continuous handling. Suitable for indoor and outdoor use for frequent washing and sterilisation.
Excellent rolling resistance.
Examples of recommended applications: trolleys for industrial indoor use, tubular trolleys, trolleys for food and chemical industry, mobile scaffoldings.
Thermoplastic polyurethane wheels, polyamide 6 centre,  swivel top plate bracket NL

bracket
NL

Injection polyurethane wheels, polyamide 6 centre, fixed bracket type NL

bracket
NL

Injection polyurethane wheels, polyamide 6 centre, swivel top plate bracket type NL with front lock

bracket
NL

Injection polyurethane wheels, polyamide 6 centre, swivel bracket with bolt hole type NL

bracket
NL

Injection polyurethane wheels, polyamide 6 centre, swivel bracket with bolt hole type NL with front lock

bracket
NL

Injection polyurethane wheels, polyamide 6 centre, swivel top plate bracket type NLX

bracket
NLX

Injection polyurethane wheels, polyamide 6 centre, fixed bracket type NLX

bracket
NLX

Injection polyurethane wheels, polyamide 6 centre, swivel top plate bracket type NLX with front lock

bracket
NLX

Injection polyurethane wheels, polyamide 6 centre, swivel bracket with bolt hole type NLX

bracket
NLX

Injection polyurethane wheels, polyamide 6 centre, swivel bracket with bolt hole type NLX with front lock

bracket
NLX

Fitting with unthreaded stem with dimensions that can be customised Fitting with unthreaded stem with dimensions that can be customised

TECHNICAL FEATURES

LOAD CAPACITY: 85-300 daN
WHEEL TREAD: thermoplastic polyurethane tread; hardness 85 Shore A; excellent rolling resistance and elasticity, good resistance to wear and to tearing
CENTRE: polyamide 6
BRACKETS:  NL, NL X, 

USAGE CONDITIONS

Suitable for environments where atmospheric agents, alcohol, glycol, mineral and organic acids, base solutions and saturated vapour are present.

WEAK ACIDSWEAK BASES
STRONG ACIDSSTRONG BASES
WATERHYDROCARBONS
ALCOHOLSOLVENTS

FLOORS

Suitable for tiles and cement-resin.
Not recommended unpaved floors or in the presence of processing residues.
Not suitable in the presence of obstacles, even if small.
They do not mark or damage fragile floors.

Tile floor
Tile floor
Asphalt floor
Asphalt floor
Resin cement floor
Resin cement floor
Not paved floor
Not paved floor
Expanded metal floor
Expanded metal floor
Floor with chips
Floor with chips
Floor with obstacles
Floor with obstacles

Force required to push or tow a wheel

For each load and diameter, the table indicates the force (in daN) needed to push or tow a single wheel at the constant speed of 4 km/h on smooth flooring. For manual handling of a 4-wheeled trolley we recommend diameters that have values < 5 daN, for frequent handling we recommend diameters with values < 3 daN.

50 KG 100 KG 150 KG 200 KG 250 KG 300 KG
80 mm 3,4----------
100 mm 1,54--------
125 mm 12,54------
150x45 mm <11,32,32,52,8--
160 mm <11,31,72,23,3--
200 mm <1<11,62,53,75