|
Uses
Suitable for trolleys with light-duty loads, also in the presence of obstacles and for indoor-outdoor use. The grey non-marking rubber tyre makes them suitable for use on fragile floors as well as in in domestic/institutional environments.
Examples of recommended applications: luggage trolleys, tool trolleys, small mobile
scaffoldings, waste bin containers.
Technical features
LOAD CAPACITY: 65-225 daN
WHEEL TREAD: standard non-marking rubber tread; hardness 80 Shore A
CENTRE: polypropylene
BRACKETS:
Environments of use
Suitable for industrial and institutional environments, also in the presence of humidity and weak acids. Not suitable in presence of strong acids, bases and solvents. Fitted with stainless steel brackets, they are also suitable in presence of medium harsh chemical agents.
| WEAK ACIDS |  | WEAK BASES |  | | STRONG ACIDS |  | STRONG BASES | | | WATER | | HYDROCARBONS | | | ALCOHOL | | SOLVENTS | |
Floors
Suitable for all types of floors, even outdoors. They facilitate the overcoming of obstacles.
They do not damage or mark floors.
Force required to push or tow a wheel
| 50 KG | 100 KG | 150 KG | 200 KG | 225 KG |
|---|
| 80 mm | 5 | -- | -- | -- | -- | | 100 mm | 2,5 | -- | -- | -- | -- | | 125 mm | 2,2 | -- | -- | -- | -- | | 140 mm | 2 | 5,5 | -- | -- | -- | | 150 mm | 2 | 5 | -- | -- | -- | | 160 mm | 1,5 | 3,5 | 7,5 | -- | -- | | 180 mm | 1 | 3,2 | 6 | -- | -- | | 200 mm | 1 | 3 | 5,5 | 8,5 | 10 |
For each load and diameter, the table indicates the force (in daN) needed to push or tow a single wheel at the constant speed of 4 km/h on smooth flooring. For manual handling of a 4-wheeled trolley we recommend diameters that have values < 5 daN, for frequent handling we recommend diameters with values < 3 daN.
|
| Options available to order |
/22blocc.png/%24FILE/22blocc.png) | Bracket with directional lock diam. 80-125 mm |
| /22_posteriore.png/%24FILE/22_posteriore.png) | Bracket with rear brake d. 150-200 mm |
| /401215.png/%24FILE/401215.png) | Directional lock for brackets NL-M-P d. 150-200 mm |
| /22ZAMA.png/%24FILE/22ZAMA.png) | Fitting with stem in Zamak alloy d. 80-125 mm |
|
|
|